The
XFlex X4 narrow web label and packaging printing press offers high efficiency for the everyday converter by combining OMET’s patented chilled Impression roll print head design with top-rate electronic equipment including OMET famous Vision fully automatic (MD & LD) register control system, twin servo-motors on each printing unit that deliver industry leading label and thin film printing capabilities. The flexo press XFlex X4 offers a shorter web path, limited footprint, wide accessibility to the press for changes and regulations, and overall consistent printing results satisfy all converters who still rely on print cylinders.
Any job changeover is easily and rapidly performed thanks to a special ‘Easy change’ configuration, which guarantees lower waste levels, faster set-up and reduced run-to-register time. With the XFlex X4 it is possible to obtain highly
consistent quality and superior production performance in short runs through
simplicity and intuitiveness.
- Combines UV Flexo, water-based Flexo, UV Silk-screen, Cold and Hot Foil, UV Lamination
- Additional units are located on sliding rails and positioned anywhere along the press like cold Foil, web turn bars, print on adhesive, in-line lamination
- The silkscreen printing unit can be inserted onto any print position in replacement of a flexo unit
- Delivery can be roll-to-roll, roll-to-sheet, roll-to-blank and folded products
- All press operations have been designed to facilitate the printers work.
- A machine that fully and truly complies with current safety regulations
- Extremely intuitive touch-screen interface
- Ease of use and fast job change in less than 30 seconds thanks to the extractable and interchangeable cassettes
- Setting and storing of all job parameters via a very friendly-use software
- A completely re-designed converting section in which the die-cutters may automatically rise to disengage the drive
- Ergonomic access for adjustment with longitudinal cutting unit placed in a vertical position
- Improved performance in terms of speed and safety with new Rock'n'Roll Dual Function for easy waste removal
- Thick plastic film printable in total safety thanks to the special rewind units with independent tension control
- Easy to load and replace on the press
- No adjustments to the doctor blade pressure, which has been optimized for tolerance in the pre-load stage
- One-point adjustment concept: no operators’ movement from one side to the other of the unit: all the ink and print pressure adjustments are located on the operator’s side
- The press can print using very low volumes of ink: less than a glass is needed to start up!
- Min. 5 1/2'' - Max. 24”
- Photopolymer cost savings, especially on short runs, using the smallest formats
| 370 | 440 | | Max speed | 190 m/min (650 fpm) | 190 m/min (650 fpm) |
| Unwinding roll diameter | 1000 (40'') | 1000 (40'') |
| Web width | 370 mm (14 4/8'') | 440 mm (17 2/8'') |
| Print width | 360 mm (14 1/8'') | 430 mm (16 7/8'') |
| Printing plates technology | Cylinders | Cylinders |
| Cross registration | servo | servo |
| Longitudinal print registration (MD) | servo | servo |
| Automatic pre-register print/die cutting | integrated/integrato | integrated/integrato |
| Anilox roll Cylinder | gearless and lightweight | gearless and lightweight |
| Automatic CD and MD register system | Vision-1 | Vision-1 |
| Quick Ink Change System | instant opening, using lightweight ink pans | instant opening, using lightweight ink pans |
| AVAILABLE PRINTING TECHNOLOGIES | | |
| Flexo UV | 5 1/2'' - 24’’ | 6’’ - 24’’ |
| Flexo Water Base | 5 1/2'' - 24’’ | 6’’ - 24’’ |
| Rotary silk-screen | 12'' - 24'' | 12'' - 24'' |
| CONVERTING | | |
| Driven die-cutting section | Max 24’’ | Max 24’’ |
| Rock’n’Roll "Dual Function" matrix stripping unit | 760 mm (30”) | 760 mm (30”) |
| OTHER TECHNICAL INFORMATION | | |
| Rewinder diameter | 760 mm STD (1000 mm optional) | 760 mm STD (1000 mm optional) |
| Infeed | servo driven | servo driven |
Flexo
Printing
Rotary silkscreen
Printing
Cold Foil
Finishing
Hot Foil
Finishing
Delam/Relam - Glue-side printing
Finishing
Peel & Seal
Finishing
ECDC - Easy-Change Die-Cut
Converting
Rock'n'Roll Dual Function
Converting
UV & UV LED
Drying & Curing
Hot Air drying systems
Drying & Curing
Self-adhesive labels
In-Mold Lables (IML)
Shrink sleeves
Aluminum packaging
Wet-glue labels
Booklet and coupon labels
Wrap Around Labels
