iflex

iFlex

THE LABEL PRESS

The iFlex label press is simple to use and quick at set-up! Several innovations characterize this press, all aiming at simplifying the printer’s work in reaching the highest quality, effortless. They include servo-assisted pre-register and register setting devices that speed up the machine set-up (1 minute to set 8 Flexo units) and rebooting after job change.

iFlex has shortest web path in narrow web printing for incredible savings in the start-up phase (waste measured is below the transition paper between two prints!). iFlex is the only machine to have all the impression rollers Direct Drive with obvious benefits on the print quality and in waste savings. 

The machine handles a wide range of sizes, from 5,5" to 18'' for small spending in printing plates production. iFlex is designed to work continuously, without maintenance stops. It is a robust, silent press, meant for intensive work cycles and performance, and consistent result.

iFlex printing press for labels fills a gap in technology supporting medium to large label converters whose need is to produce in one pass large amounts of standard labels with just-in- time deliveries and decrease process wastage. iFlex can also represent for label converters with lower budget capabilities the ideal press to print labels with a high level of efficiency and a high return on investment.

iFlex. THE LABEL PRESS

The easiest way to pre-register every printing cylinder thanks to the first laser application on a flexo press. The laser beam guides the operator to the perfect alignment of all plates with one simple move, without waiting for further set-up time.


iVision system consists of a set of Smart Cameras, one on each flexo unit, which allows the operator to check and fine-tune the register of each color one-by-one in real-time, with sharp precision and very little waste involved. 


iFlex is the first and only press with next-generation direct driven printing transmission, which assures no backlash and absolute printing stability during every run and for the entire lifetime of the machine.


ECDC system is a compact and ergonomic die-cutting unit with “Easy-Change” technology allowing for quick and easy handling of cylinders and flexible dies thanks to its sliding system, with no need for any lifting device. 


iFlex 370
Max speed190 m/min (630 fpm)
Web width370mm (14''1/2)
Print width365mm (14''3/8)
Print repeat (infinitely variable)from 5,5 to 18''
Register adjustment and controliLight & iVision
Printing plates technologyCylinders
AVAILABLE PRINTING TECHNOLOGIES
Flexo UV/UV LEDfrom 5,5 to 18''
Flexo Water Basefrom 5,5 to 18''
Rotary silk-screen from 12 to 24''
CONVERTING
ECDC Easy-Change Die Cutfrom 8 to 24'' (suggested 12'' min.)
Rock’n’Roll "Dual Funtion" matrix stripping760 mm (30”)
The technical data contained in this table are not binding. OMET is entitled to change the features of the products without prior notice.
Flexo

Printing

Rotary silkscreen

Printing

Cold Foil

Finishing

Hot Foil

Finishing

Delam/Relam - Glue-side printing

Finishing

Peel & Seal

Finishing

ECDC - Easy-Change Die-Cut

Converting

Rock'n'Roll Dual Function

Converting

UV & UV LED

Drying & Curing

Hot Air drying systems

Drying & Curing

Self-adhesive labels
Wet-glue labels
Booklet and coupon labels
In-Mold Lables (IML)
Wrap Around Labels